Compaq Pagemarq 10 Printer Service Mode
(From: Darren Mckillop (Darren.Mckillop@gecm.com).)
Try powering on while holding escape, this will
put you into service mode. Press the up arrow to start the engine
test, if this works you may have a problem with the xerox controller
board.
Try disconnecting all the n/w cables and reseating
the cables on the system board. Remove this by the two thumbscrews
at the back and slide out as far as you can then pull the cable
off.
Back to Dot Matrix and Daisy-Wheel Printer Problems
Save money on printer stuff now
Search below for great deals on all of your printing needs, including
printer cartridges, toner cartridges, ink refill kits, cleaning
cartridges, printer paper, and much more.
|
